How to Pair Your OnePlus Buds? - DeviceMAG (2024)

Are you struggling to pair your OnePlus Buds? Don’t worry, we’re here to help! In this blog post, we’ll walk you through the steps for pairing your OnePlus Buds with your phone and other devices.

To get started, you’ll need to open the charging case of your OnePlus Buds. Once the case is open, press and hold the setup button for two seconds. The indicator lamp on the charging box should then start flashing white, indicating that the buds are available for pairing.

If not, try resetting your OnePlus Buds Z by long pressing the button for 15 seconds (you’ll see a constant red light). After resetting your buds, you’ll need to remove them from any previously paired devices and then pair them again with your phone or other devices.

To pair your buds with a new device, open the Nord Buds charging case without removing the buds. Hold down the button on the back of the case until the LED light on the front turns white and begins pulsing. Then look for “OnePlus Nord Buds” in your device’s Bluetooth settings page and select it to pair. Once successfully paired, remove your buds from their charging case and start listening!

We hope this blog post was helpful in guiding you through pairing your OnePlus Buds! If you have any questions or issues during this process, feel free to contact us for assistance.

Pairing OnePlus One with Buds Z

To put the Buds Z in pairing mode on a OnePlus one, first, open the charging box and press and hold the setup button for 2 seconds. The indicator lamp of the charging box will flash white, indicating that the buds are now ready to be paired. Next, go to your device’s Bluetooth settings and find “Buds Z” in the list of available devices. Select it and you should be connected to your Buds Z.

Troubleshooting OnePlus Buds Connection Issues

It’s possible that your OnePlus Buds are having difficulty connecting due to a range issue, a Bluetooth connection issue, or outdated firmware. Try resetting your OnePlus Buds by long pressing the button for 15 seconds (you’ll see a constant red light). You’ll need to pair them again with your phone and other devices it was paired with before. Make sure you remove it from the paired list first. If that doesn’t help, try updating the firmware of your OnePlus Buds Z and check whether this resolves the problem.

Pairing OnePlus Nord Buds

To pair your OnePlus Nord buds, start by opening the charging case without removing the buds. Once open, hold down the button on the back of the case until the LED light on the front turns white and begins pulsing. Then, go to your device’s Bluetooth settings page, find and select “OnePlus Nord Buds” from the list of available devices, and pair. Finally, remove your buds from the case and start listening!

Resetting OnePlus Earbuds

To reset your OnePlus earbuds, press and hold the setup button on the charging box for 10 seconds. You’ll notice the indicator light blinking red five times. Release the button once it’s done and your earbuds will be restored to their factory settings.

Troubleshooting Issues with Phone and Earbud Pairing

There could be a few different reasons why your phone isn’t pairing with your earbuds. First, make sure that your phone and earbuds are close to each other when attempting to pair them. Secondly, try turning both the earbuds and your phone off and on again to reset the connection. Thirdly, make sure that the earbuds are fully charged or connected to power if they use batteries. Finally, if possible, try resetting the earbuds by following the manufacturer’s instructions. If none of these steps work, you may need to contact the manufacturer for further assistance.

Connecting OnePlus Buds After Forgetting Device

To connect your OnePlus Buds after you have forgotten your device, you will need to reset the Buds. To do this, press and hold the setup button on the charging box for 10 seconds. If the indicator lamp flashes red, release the button. The buds are now reset and available for pairing. When you open the cover of the charging box, the indicator lamp will flash white, indicating that it is ready to be paired with a new device. To pair your OnePlus Buds with a new device, simply go to your device’s Bluetooth settings and select “OnePlus Buds” from the list of available devices. Your OnePlus Buds should now be connected to your device.

Conclusion

In conclusion, pairing your OnePlus Buds is an easy and straightforward process. All you need to do is open the charging case, hold down the setup button for two seconds, and then find the “OnePlus Nord Buds” on your device’s Bluetooth settings page. Once it has been paired, simply remove the buds and start listening. With this simple process, you can take advantage of your OnePlus Buds’ great sound quality and enjoy all your favorite music or podcasts!