CrossFire PRO Orders Placed Today Estimated Shipping In 2 weeks.
The production ready 4' x 3' CNC Plasma Table to take your fabrication to the next level for only $2749.
Configure Your PRO
Estimated Shipping: In 2 weeks
Order the CrossFire PRO CNC Plasma
48.25" x 33.3" CNC Plasma Table featuring Powered Z-axis, Initial Height Sensing, and optional automatic THC module.
CrossFire PRO Orders Placed Today Estimated Shipping within 2 Weeks.
Included: What to Expect→
CrossFire PRO CNC Plasma Table Complete ready-to-assemble CNC Plasma Machine.
$2749
Water Table Stainless Steel Water Table is standard on the CrossFire PRO.
FireControl Motion Control Software Developed to control the CrossFire line of CNC Machines.
Autodesk Fusion 360 CAD/CAM Software Powerful CAD/CAM Software that is Free for personal (non-commercial) and educational use.
Add-ons:
$3000 $2749
+$249 flat rate shipping to
contiguous USA.
CrossFire PRO machine orders placed today are estimated to ship in 2 weeks. You are entitled to a full refund minus a 2.4% transaction fee until your order ships.
PRODUCTION READY
Large Work Area
Water Table sized to cut full width sheets so you can cut more parts faster.
Initial Height Sensing
Floating Z-Axis with Initial Height Sense for increased consumable lifetime and tip-up avoidance.
THC Compatible
Electronics and software are Plug-n-Play with add-on Auto Torch Height Control module.
THE Crossfire turned PRO
You asked and we listened. The CrossFire PRO features a production ready 48.25” x 33.3” cutting area, powered Z-axis with Initial Height Sense, reinforced steel frame w/ integrated stainless water table, and Torch Height Control compatibility. Bring industrial capabilities to your shop with a machine that wont quit.
Reinforced Steel Frame
Whether you’re cutting sheet metal signage or 1” steel parts for heavy fab, the PRO has got you covered. The 230 lb frame features structural steel tubing and gusseted joints for maximum rigidity.
Stainless Steel Water Table
The large stainless water table that comes standard on the PRO ensures that your material stays cool when cutting and keeps fumes down. With sub-flush edges, you can now slide full width sheets through the machine slat surface.
Powerful Control Software
Unlike other CNC Plasma manufacturers, Langmuir Systems develops it's own machine control software, FIRECONTROL. This allows us to regularly release updates and new features with CrossFire Customer suggestions. Watch this overview to see how FireControl works.
Learn more about FireControl →
From the makers of the CROSSFIRE
Don’t take our word for it- Check what our customers have to say about the CrossFire CNC. Join the growing community today.
Read Customer Reviews →
IGNITE YOUR BUSINESS
Stop outsourcing your cutting needs and put a production capable machine in your shop at a fraction of the price.
MACHINE COMPARISON
Langmuir Systems offers powerful, affordable, and well-supported CNC Plasma machines for all different use cases. See what CNC Plasma can do and transform your fabrication process today.
More about CNC Plasma → Compare Machines
CrossFire® PRO Specifications
Cutting Envelope Dimensions:
48.25” (X) x 33.3” (Y) x 2.75" (Z) + 3” Manual Height AdjustmentMachine Weight:
223 PoundsLinear Bearing Type:
Ball Bearing Carriages on Zinc-plated Steel Tube RailsStepper Motor Size:
NEMA 23; X-Axis 284 oz-in, Y-Axis (2) 284 oz-in, Z-Axis 180 oz-inPC Interface:
Windows USBMechanical Drive System:
3/8”-8 4-Start ACME Lead Screws and Acetal Anti-Backlash Lead Nuts, 1/2” 5-Start Lead Screw (X)
Motion Accuracy:
0.002” per 12” inchesStep Resolution:
0.0005”Maximum Cut Speed:
300 ipmTable Surface:
Replaceable Steel Slats, 50mm wide x 3mm thickInput Power:
110/220 VAC (selectable)Torch Height Control:
Powered Z Axis with Floating Head Torch Mount and Initial Height Sensing. THC Compatible
MORE OF
THE PRO
PRO FAQ
What is the cutting area of the CrossFire PRO?
The cutting envelope of the PRO is 48.25” (X) x 33.3” (Y) x 2.75" (Z) + 3” Manual Height Adjustment.
Is the machine expandable to 4’ x 8’?
No. While we may offer an expansion kit in the future, it is not currently planned.
Can I finance the purchase of the CrossFire PRO?
Langmuir Systems offers financing through Affirm. Choose the Affirm payment option during checkout to structure machine payments up to 36 months with competitive rates.
What are the electrical requirements?
The machine runs on a single 120V/20 amp outlet. You will need additional 120/240V outlets for the air compressor and plasma cutter.
What is included?
The CrossFire PRO CNC plasma machine was designed to be a complete out-of-the box solution for CNC plasma cutting. It includes everything that is needed to begin making parts with the exception of a computer and a plasma cutter. Below is a snapshot of what is included with your basic machine purchase:
- Complete three-axis CNC plasma cutting machine - just attach your plasma torch and start cutting.
- Four NEMA 23 stepper motors and complete plug & play electronics motion control unit
- All electronics cables including 120V power cord, USB cable, Torch ON/OFF wiring, and THC pigtail cable.
- Autodesk Fusion 360 CAD Design Software and CAM Toolpath Generation Software (Free to use for hobbyists and small startups).
- FireControl Motion Control Software designed and developed by Langmuir Systems specifically for the PRO.
- Unlimited access to Langmuir Systems FireShare
- Detailed Assembly Instructions and User Guide
- Access to lifetime customer support
- 12 Month Factory Warranty
Can I fit full sheets of metal on my CrossFire PRO?
The CrossFire PRO is wide enough to support and cut a full 4’ width sheet. A full 4’x8’ sheet can be placed on the machine and passed through it for cutting. We recommend using adjustable height stands to support a full sheet when passing through the machine.
What is Initial Height Sensing (IHS)? Does it cost extra?
IHS is the system that automatically senses the top surface of the material to ensure that the torch pierces at the perfect height for each cut. It works on wet, painted, or rusted surfaces.
What is automatic Torch Height Control (THC)?
The automatic Torch Height Control unit is an electronic module that is wired to your plasma cutter and the PRO electronics enclosure for the purpose of maintaining the same torch-tip-to-material distance during cutting. This is required when cutting large sheets of material that may not be perfectly flat and also to account for material warpage during cutting.
Do I need to purchase the automatic Torch Height Control (THC) add-on?
If you plan to cut small and medium sized parts 15”x15” or less, then you may not need to purchase the THC module because the Initial Height Sense system will be sufficient for maintaining your torch-tip-to-material distance over a small area. If you plan to cut artwork and signage out of thin gauge material, we recommend adding the THC unit.
Can I add electronic accessories to this machine?
Yes, the front panel has an expansion port so that accessories such as limit switches and air scribers can be added by the owner. In the future, we plan to release add-on accessories to the machine that can be connected using this expansion port.
Can I use my CrossFire PRO as a wood router?
The Floating head Z axis was specifically designed for plasma use only and is not compatible with a wood router.
Can I purchase add-on accessories at a later date?
Yes add-on accessories such as the laptop stand and THC can be purchased at a later date. Keep in mind that the price is discounted and the shipping is free when purchasing add-ons bundled together with the PRO.
What Plasma Cutters are compatible with the CrossFire PRO?
The same blow-back start plasma cutters that are compatible with the CrossFire are compatible with the PRO. See our Plasma Cutter compatibility page for more details. The torch lead must be at least 16’ long to be used on the machine. If your torch lead is shorter than 16’ contact your plasma cutter manufacturer to see if they can supply a torch with a longer lead. Note: All Vipercut 30i machines come standard with a 13’ torch lead and cannot be used on the PRO without purchasing a longer torch lead.
What is the maximum plate thickness that can be cut on this machine?
The maximum plate thickness that can be supported by this machine is 1" (25.4mm) steel plate. While the CrossFire PRO CNC machine is capable of supporting material of up to 1" thickness for cutting, the maximum cutting thickness for your setup will be dependent on the specific plasma cutter that you are using. We advise you to refer to your respective plasma cutter owners manual to obtain relevant information related to maximum cutting thickness.
How can I purchase replacement parts for this machine?
Langmuir Systems will keep an inventory of all replacement parts that go into a CrossFire PRO. Any necessary replacement parts will be shipped to you free of charge while your machine is still under factory warranty. After the warranty expires, simply email support@langmuirsystems.com for current pricing on replacement items.
Can I upgrade my CrossFire or CrossFire XL to a PRO?
Due to the high cost, we have decided not to offer an upgrade kit to convert a CrossFire to a PRO at this time.
How does the PRO ship?
The CrossFire PRO ships via UPS ground in three separate boxes weighing approximately 130lbs, 60lbs, and 44lbs.
What is the Warranty on the CrossFire PRO CNC Plasma Table?
All Langmuir Systems products are covered by a 12 month limited warranty on hardware and 6 month limited warranty on electronics. The terms of the warranty are listed below:
- Warranty benefits only apply to the original purchaser and expire if goods are resold. You must provide proof of purchase and your machine's unique serial number (if applicable) via email before a warranty claim may be filed.
- The buyer has 30 days after delivery to report and request to receive any missing items. Langmuir Systems will ship the missing items to the buyer within 10 business days. Langmuir Systems has the right to refuse replacement of items to any buyer that it suspects may not be truthful. The buyer is responsible for the replacement of any missing items after the 30 day period expires.
- Langmuir Systems guarantees the goods received to be defect free for a period of 12 months for mechanical hardware and 6 months for electronics. Items that meet the following conditions will be replaced free of charge:
- Items that are received in defective and unusable condition.
- Items that become defective and unusable after use as a result of a manufacturing, design, or material defect.
- The warranty does not cover the following types of defects:
- Defects that do not negatively affect the items functionality. Examples may include scratches, dings, dents, and surface abrasions.
- Defects that are caused by improper assembly.
- Defects that are caused by improper use.
- Defects that are caused by inadequate or incorrect routine maintenance.
- Defects that are caused by improper storage of the item or exposure of the item to the elements.
- Defects that are caused by normal wear and tear.
- If a damaged or defective item is covered by the warranty, Langmuir Systems reserves the right to request that the defective item be shipped back before supplying a replacement. Langmuir Systems will supply a shipping label to cover the expense of the return shipment. The Buyer is responsible for handling and packaging. Langmuir Systems will ship either a refurbished or brand new replacement item within 5 business days of receiving the defective item.
What is the Return and Refund Policy for the CrossFire PRO CNC Plasma Table?
All products sold directly by Langmuir Systems are eligible for return and refund. The terms of the return and refund policy are listed below:
- Only the original buyer of the item is eligible to return the item for a refund. Proof of purchase is required in order to be eligible for a refund.
- A return must be requested within 30 calendar days following the delivery of the item. Return requests after the eligibility period will be denied.
- The buyer is responsible for all shipping and handling costs associated with shipping the item back.
- Items that are eligible for return must meet all of the following requirements:
- The item must be in unused condition.
- The item must be free of defects.
- The item must be received in the original packaging.
- Langmuir Systems will inspect the item within 5 business days of receiving it. The buyer will be informed if it passes inspection and thus is eligible for a refund.
- If Langmuir Systems concludes that the item meets the refund eligibility requirements, a refund for the original transaction amount minus a 20% restocking fee will be issued to the Buyer within 5 business days following the completion of the inspection.
- 'In person' returns require permission from Langmuir Systems in advance.
More questions?
Langmuir Systems maintains a Customer Support Portal with Frequently Asked Questions and other troubleshooting information. For any other questions, please reach out to support@langmuirsystems.com
